Assessment of cadmium tolerance and biosorptive potential of Bacillus Cereus GCFSD01 isolated from cadmium contaminated soil / Avaliação da tolerância ao cádmio e do potencial biossorptivo de Bacillus Cereus GCFSD01 isolado de solo contaminado com cádmio

Continuous occurrence of heavy metals is a major cause of environmental pollution due to its toxic effects. At minimum concentrations, these metals are highly reactive and can gather in the food chains and food web, causing major dangers to public health concerns. Soil samples were collected from Paharang drain, Faisalabad. Cadmium tolerant bacteria were isolated and evaluated for their MIC against Cd. The isolated bacterial strain GCFSD01 showed MIC value upto 30 mM/L. The bacterial strain with the highest resistance against Cd was selected for further study. Molecular characterization of bacterial isolate GCFSD01 was performed by 16S rRNA which confirmed it as Bacillus cereus. Optimum growth conditions of bacterial strain were also evaluated. Strain GCFSD01 showed optimum growth at pH 7 and 37 °C temperature. Our result revealed that B. cereus strain GCFSD01 reduced 61.3% Cd after 48 hrs. Multiple metal tolerance and Cd reduction by B. cereus indicate its potential for further use for decontamination of polluted soil.

A ocorrência contínua de metais pesados é uma das principais causas de poluição ambiental devido aos seus efeitos tóxicos. A contaminação por metais pesados representa um grande risco para todas as formas de vida encontradas no meio ambiente. Em concentrações mínimas, esses metais são altamente reativos e podem se acumular nas cadeias alimentares e na cadeia alimentar, causando grandes perigos às preocupações com a saúde pública. Amostras de solo foram coletadas no esgoto de Paharang, Faisalabad. Bactérias tolerantes ao cádmio foram isoladas da amostra coletada pelo método da placa de ágar. As colônias separadas individuais selecionadas foram avaliadas quanto às suas concentrações inibitórias mínimas contra Cd. A cepa bacteriana isolada GCFSD01 apresentou valores de CIM de 30 mM/L. A colônia bacteriana que apresentou maior resistência contra o Cd foi selecionada para identificação. Após seleção da maior colônia bacteriana resistente ao Cd, coloração de Gram e diferentes testes bioquímicos foram realizados para a caracterização da bactéria isolada. A caracterização molecular do isolado bacteriano GCFSD01 foi realizada por PCR 16S rRNA confirmando a presença de Bacillus cereus. Após a identificação molecular, as condições ótimas de crescimento da cepa bacteriana também foram verificadas. A cepa GCFSD01 apresentou crescimento ótimo em pH 7 e temperatura de 37 °C. Nosso resultado revelou que a cepa de B. cereus GCFSD01 reduziu 61,3% de Cd após 48 horas. A tolerância a múltiplos metais e a redução de Cd por B. cereus indicam seu potencial para uso posterior na descontaminação do solo poluído.

Characterization of the biosorption of fast black azo dye K salt by the bacterium Rhodopseudomonas palustris 51ATA strain

BACKGROUND: Removal of dyes from wastewater by microorganisms through adsorption, degradation, or accumulation has been investigated. Biological methods used for dye treatment are generally always effective and environmentally friendly. In this study, biosorption of the Fast Black K salt azo dye by the bacterium Rhodopseudomonas palustris 51ATA was studied spectrophotometrically, at various pH (2­10), temperatures (25°C, 35°C, and 45°C) and dye concentrations (25­400 mg L-1). RESULTS: The bacterial strain showed extremely good dye-removing potential at various dye concentrations. IR studies at different temperatures showed that the dye was adsorbed on the bacterial surface at lower temperatures. Characteristics of the adsorption process were investigated by Scatchard analysis at 25°C and 35°C. Scatchard analysis of the equilibrium binding data for the dye on this bacterium gave rise to linear plots, indicating that the Langmuir model could be applied. The regression coefficients obtained for the dye from the Freundlich and Langmuir models were significant and divergence from the Scatchard plot was observed. CONCLUSION: The adsorption behavior of the dye on this bacterium was expressed by the Langmuir, Freundlich, and Temkin isotherms. The adsorption data with respect to various temperatures provided an excellent fit to the Freundlich isotherm. However, when the Langmuir and Temkin isotherm models were applied to these data, a good fit was only obtained for the dye at lower temperatures, thus indicating that the biosorption ability of R. palustris 51ATA is dependent on temperature, pH, and dye concentration.

Expression of synthetic Phytochelatin EC20 in E. Coli increases its biosorption capacity and cadmium resistance / Expressão de Fitoquelatina EC20 sintética em E. Coli aumenta sua capacidade de biossorção e resistência ao cádmio

In this study E. coli recombinant clones that express the EC20 synthetic phytochelatin intracellularly were constructed. The increasement of Cd2+ biosorption capacity, and, also, the increasement of resistance to this toxic metal were analyzed. A gene that encodes the synthetic phytochelatin EC20 wassynthesized in vitro. The EC20 synthetic gene was amplified by PCR, inserted into the DNA cloning vectors pBluescript®KS+ and pGEM®-TEasy, and also into the expression vectors pTE [pET-28(a)® derivative] and pGEX-T4-2®. The obtained recombinant plasmids were employed for genetic transformation of E. coli: pBsKS-EC20 and pGEM-EC20, they were introduced into DH10B and DH5α strains, similarly to pTE-EC20 and pGEX-EC20 that were introduced into BL21 strain. The EC20 expression was confirmed by SDS-PAGE analysis. The recombinant clones' resistances to Cd2+ were determined by MIC analyses. The MIC for Cd2+ of DH10B/pBKS-EC20 and DH10B/pGEM-EC20 were 2.5 mM (EC20 induced), and 0.312 mM (EC20 repressed);respectively, 16 and 2 times higher than the control DH10B/pBsKS (0.156 mM). The MIC for Cd2+of BL21/pTE-EC20 was 10.0 mM (EC20 induced) and 2.5 mM (EC20 repressed), compared with the control BL21/pTE which was only 1.25 mM. Analysis of ICP-AES showed that BL21/pGEX-EC20, after growth on the condition of EC20 expression, absorbed 37.5% of Cd2+, and even when cultured into the non-induction condition of EC20 expression, it absorbed 11.5%.These results allow the conclusion thatrecombinant E. coli clonesexpressing the synthetic phytochelatin EC20 show increased capacity for Cd2+ biosorption and enhanced resistance to this toxic ion.

Foram construídos clones recombinantes de E. coli que expressam intracelularmente a fitoquelatina sintética EC20. Foi analisado o aumento na capacidade de biossorção de Cd2+ e o aumento da resistência a este metal tóxico.Foi sintetizado in vitro um gene codificante da fitoquelatina sintética EC20. O gene EC20 sintético foi amplificado por PCR, inserido nos vetores de clonagem pBluescript®KS+ e pGEM®-TEasy, e nos vetores de expressão pTE [derivado de pET-28(a)®] e pGEX-T4-2®. Os plasmídeos recombinantes foram empregados na transformação genética de E. coli: pBsKS-EC20 e pGEM-EC20 foram introduzidos nas linhagens DH10B e DH5α; e, pTE-EC20 e pGEX-EC20 na linhagem BL21-DE3. A expressão EC20 foi analisada por SDS-PAGE. As resistências a Cd2+ dos clones recombinantes foram determinadas por análises de MIC.A MIC para Cd2+ de DH10B/pBsKS-EC20 e de DH10B/pGEM-EC20 foi 2,5 mM (EC20induzido) e 0,312 mM (EC20 reprimido); respectivamente, 16 e 2 vezes superiores às do controle DH10B/pBsKS (0,156 mM). A MIC para Cd2+ de BL21/pTE-EC20 foi 10,0 mM (EC20 induzido) e 2,5 mM (EC20 reprimido), comparado a do controle BL21/pTE que foi apenas 1,25 mM. A análise de ICP-AES mostrou que BL21/pGEX-EC20, após crescimento na condição de expressão de EC20, absorveu 37,5% de Cd2+e, mesmo quando cultivado na condição de não-indução de expressão EC20, absorveu 11,5% de Cd2+. Estes resultados permitem a conclusão de que os clones recombinantes de E. coli que expressam a fitoquelatina sintética EC20 apresentam aumento da capacidade de biossorção de Cd2+ e de resistência a este íon tóxico.

Biosorption potential of lead tolerant fungi isolated from refuse dumpsite soil in Nigeria

Metals are non-biodegradable and recurrent in the environs. Heavy metals tolerant fungiwere isolated from refuse dumpsite soil using pour plate method. These fungiwere identified as Aspergillus niger, Penicillium chrysogenumandRhizomucor sp. The fungal isolates were screened for cadmium (Cd), lead (Pb) and zinc (Zn) with concentration of 200ppm, 400ppm and 600ppm. Aspergillus nigerand Penicillium chrysogenumshowed high tolerance for the metals in contrast to the control. The fungiwith high tolerance were used for biosorption study. However, Penicillium chrysogenumshowed higher lead removal or biosorption potential of 1.07ppm, 3.35ppm and 4.19ppm as compared with Aspergillus nigerwith lead removal of 0.67ppm, 3.11ppm and 3.79ppm at 5th, 10thand 15thday respectively. One-way Analysis of Variance was used to interpret the data generated from the biosorption study which revealed that there was no significant different (p>0.05)between the lead removal of Aspergillus nigerandPenicillium chrysogenumon the 5thday but there was significant difference (p<0.05)in the lead removal of Aspergillus nigerand Penicillium chrysogenumon the 10thand 15thday. This study suggests the use of these fungal isolates for removal and biotreatment of heavy metal contaminated and polluted environment.

Isolation, identification and heavy metals biosorption of a lead and cadmium-tolerant strain / 生物工程学报

Adding biological passivation agent during composting is one of the most effective ways to reduce the toxicity of heavy metals in contaminated livestock manure. To further improve biological passivation, we obtained a strain with high-heavy metal compounds tolerance to passivate heavy-metal contaminated manure and to characterize heavy-metal biosorption. High-tolerance microorganisms for lead and cadmium were isolated and screened from swine manure composting samples. The strain was identified by its morphology and molecular biology. After the influence of different pH, temperature and salt concentrations on growth of the strain were investigated, the optimal growth conditions were obtained for further analysis of its biosorption characteristics of lead and cadmium. The bacterium with tolerance to lead and cadmium termed SC19 was obtained, whose lead resistance was 600 mg/L and cadmium resistance was 120 mg/L. The isolate was further identified as Cedecea sp., and then its optimum pH was 7.0, temperature was 37 °C, and salt concentration was 0.5%. Lead removal was highest after 30 min of adsorption by the SC19 strain cultured for the stationary phase 36 h, and the maximum removal rate and biosorption capacity of lead were 60.7% and 329.13 mg/g, respectively. Meanwhile, cadmium removal was highest after 30 min of adsorption by the strain cultured for the logarithmic phase 8 h, and the maximum removal rate and biosorption capacity of cadmium were 51.0% and 126.19 mg/g, respectively. Fourier Transform InfraRed (FT-IR) results revealed that the biosorption process mainly happened on the surface of SC19 cell and many active groups on the cell surface could chelate the Pb²⁺ and Cd²⁺. By comprehensive comparison, it was showed that strain SC19 shared a certain capacity of Pb²⁺ and Cd²⁺ biosorption, and the bacterium provided precious microbial germplasm resources for biological passivation of heavy metal contaminated manure.

Bioremediation of heavy metals in food industry: application of Saccharomyces cerevisiae

Heavy metals are natural elements in the Earth's crust that can enter human food through industrial or agricultural processing, in the form of fertilizers and pesticides. These elements are not biodegradable. Some heavy metals are known as pollutants and are toxic, and their bioaccumulation in plant and animal tissues can cause undesirable effects for humans; therefore, their amount in water and food should always be under control. The aim of this study is to investigate the conditions for the bioremediation of heavy metals in foods. Various physical, chemical, and biological methods have been used to reduce the heavy metal content in the environment. During the last decades, bioremediation methods using plants and microorganisms have created interest to researchers for their advantages such as being more specific and environmentally friendly. The main pollutant elements in foods and beverages are lead, cadmium, arsenic, and mercury, which have their own permissible limits. Among the microorganisms that are capable of bioremediation of heavy metals, Saccharomyces cerevisiae is an interesting choice for its special characteristics and being safe for humans, which make it quite common and useful in the food industry. Its mass production as the byproduct of the fermentation industry and the low cost of culture media are the other advantages. The ability of this yeast to remove an individual separated element has also been widely investigated. In countries with high heavy metal pollution in wheat, the use of S. cerevisiae is a native solution for overcoming the problem of solution. This article summarizes the main conditions for heavy metal absorption by S. cerevisiae.

Biosorption and proteomic analysis of an encapsulated endophytic heavy-metal resistant Pestalotiopsis sp

Aims@#A study on biosorption ability using encapsulated endophytic fungi has been carried out to investigate its biosorption potential in removing heavy metals. Biosorption has emerged as an alternative bioremediation process to remove and sequester heavy metal ions from polluted water. An endophytic Pestalotiopsis sp. (isolated from Nypa fruticans) was found to be able to resist copper (Cu), chromium (Cr), lead (Pb) and zinc (Zn) up to 1,000 ppm and thus the aim of this study was to investigate the biosorption ability using encapsulated live and dead Pestalotiopsis sp. biomass (at pH 4-6) to remove heavy metals. Additionally, a proteomic study was conducted to investigate down- and up-regulation expression levels of proteins under the treatment of the heavy metals. @*Methodology and results@#Encapsulated live fungal biomass displayed higher efficiency in removing chromium at pH 5 and 6, while both encapsulated live and dead biomass were able to remove lead at pH 4 and 5 and copper at pH 5. Five (5) proteins of interest were identified via MALDI-ToF analysis. Among the proteins identified, multidrug resistance protein (MRP homolog) was up-regulated in the presence of lead. @*Conclusion, significance and impact of study@#The data obtained in this study provides an initial understanding of the biosorptive and defensive mechanisms of Pestalotiopsis sp. under heavy metal stress.

Kinetic and Isotherm of Mn(II) Biosorption by Lyophilized Cells of Proteus penneri 2120 (KY712431) Isolated from Industrial Wastewater

This study aimed to isolate and identify a novel bacterial isolate potential resistant to Mn2+ as well as to investigate the biosorption isotherms of Mn2+ removal from aqueous solutions by the freeze-dried biomass of this bacterium. Sixty three manganese resistant bacterial isolates were recovered from 20 industrial wastewater samples. Interestingly, among them, the isolate number 2120 was able to resist up to 140 ppm of Mn2+ and was selected for the further processes. This isolate was phenotypically characterized and identified by 16S rRNA gene sequencing as Proteus penneri and assigned accession number KY712431 in the GenBank database. The effects of pH and contact time on the biosorption process were studied and optimum pH for biosorption equilibrium was 6 while the optimum contact time was 30 min at room temperature. The maximum adsorption capacity (qmax) of Mn2+ removal from aqueous solutions by the freeze-dried biomass of Proteus penneri 2120 was 175.4 mg/g. According to Freundlich and Langmuir models, the correlation coefficients (R2) were 0.9977 and 0.5525, respectively. Therefore the studied biosorption isotherms are fit well with Freundlich model rather than the Langmuir model. Our findings suggest that the dried biomass of the isolate Proteus penneri 2120 is potentially applicable for manganese metal ion removal from the industrial waste water.

Investigation of Some Parameters Affecting Methyl OrangeRemoval by Fusarium acuminatum

ABSTRACT Dye stuff released to the ecosystem from textile industries cause a serious contamination and become a major environmental problem over the last few decades. As biological decolorization of textile wastewater is an important issue, Fusarium . acuminatum was used to removal of a frequently used textile dye, methyl orange. Live pellet of Fusarium acuminatum was used and decolorization studies performed in various temperatures and pH conditions with different dye concentrations. The highest decolorization rate was observed at 35ᴼC. 60 mg/L was found as the optimum initial dye concentration. In the pH range of 3-4, decolorization rate was approximately 70%. It was seen that Fusarium acuminatum have the great ability of the methyl orange removal. To our knowledge, it took place for the first time in the literature.

ADSORCIÓN DE PLOMO (II) EN SOLUCIÓN ACUOSA CON TALLOS Y HOJAS DE Eichhornia crassipes / ADSORPTION OF LEAD (II) WITH STEMS AND LEAVES OF Eichhornia crassipes IN AQUEOUS SOLUTION

La presencia de metales pesados, como el plomo (Pb+2), en los cuerpos de agua genera alteraciones sobre la calidad ambiental y la salud pública, debido a su solubilidad y su capacidad de acumulación en la cadena trófica, problemática que se puede incrementar por la acumulación de Eichhornia crassipes, una maleza acuática con alta capacidad invasora, cuya presencia en los ecosistemas acuáticos favorece los procesos de eutrofización y crecimiento de microorganismos patógenos, vectores de enfermedades. Como alternativa para la eliminación de metales pesados y el aprovechamiento de tallos TEC y hojas HEC de E. crassipes, se evaluó la capacidad de adsorción y de eficiencia de remoción de Pb+2 en solución acuosa, de dicha biomasa. Inicialmente, se realizaron ensayos batch, para analizar la influencia de la dosis de adsorbente, tiempo de contacto y pH de la solución. Como método de disposición final, se analizó la calcinación, a temperaturas de 700 y 800°C. Los datos experimentales de equilibrio fueron correlacionados, utilizando los modelos de Langmuir y Freundlich. El modelo que mejor se ajustó fue el de Langmuir, con R² = 0,9816 TEC y R² = 0,9854 HEC, lográndose una máxima capacidad de adsorción de 172,41mg/g TEC y 131,58mg/g HEC, con 0,2g de biomasa/200mL, pH 5,5 y 3h de contacto. En todos los ensayos, se lograron remociones de Pb+2 superiores al 97%. Los ensayos de calcinación indican que, a temperaturas ≥800°C, es posible estabilizar la biomasa residual, impidiendo que los cationes metálicos removidos sean liberados de la matriz biológica, por efectos de soluciones lixiviantes de bajo pH.

The presence of heavy metals such as lead (Pb+2) in water bodies causes alterations in environmental quality and public health due to their solubility and capacity of accumulation in the food chain. Problems that can be increased by the accumulation of Eichhornia crassipes an aquatic weed with high invasive capacity whose presence in the aquatic ecosystems favors the processes of eutrophication and growth of pathogenic microorganisms vectors of diseases. As an alternative for the removal of heavy metals and the use of TEC stems and HEC leaves of E. crassipes, the adsorption capacity and removal efficiency of Pb+2 in aqueous solution of this biomass were evaluated. Initially batch tests were performed to analyze the influence of the adsorbent dose, contact time and solution pH. As final disposal method, the calcination was analyzed at temperatures of 700 and 800°C. The equilibrium experimental data were correlated using the Langmuir and Freundlich models. The best fit model was the Langmuir model with R²=0.9816 TEC and R²=0.9854 HEC, achieving a maximum adsorption capacity of 172.41mg/g TEC and 131.58mg/g HEC with 0.2 g Of biomass/200mL, pH 5.5 and 3h of contact. Pb+2 removals above 97% were achieved in all tests. Calcination tests indicate that at temperatures ≥800°C it is possible to stabilize the residual biomass by preventing the removed metal cations from being released from the biological matrix by the effects of low pH leaching solutions.

Panus tigrinus as a potential biomass source for Reactive Blue decolorization: isotherm and kinetic study

Background: Textile and dye industries pose a serious threat to the environment. Conventional methods used for dye treatment are generally not always effective and environmentally friendly. This drove attention of scores of researchers to investigate alternative methods for the biodegradation of dyes using fungal strains. In this work, white-rot fungus (Panus tigrinus) was used as a biosorbent for the decolorization of Reactive Blue 19. The process parameters that were varied were initial concentration (50­150 mg/L), contact time (30­90 min), and pH (2­6). In addition, to gain important data for the evaluation of a sorption process, the equilibrium and kinetics of the process were determined. Results: White-rot fungus showed great potential in decolorizing Azo dyes. The strain showed the maximum decolorization of 83.18% at pH 2, a contact time of 90 min, and an initial concentration of 50 mg/L. The Langmuir isotherm described the uptake of the Reactive Blue 19 dye better than the Freundlich isotherm. Analysis of the kinetic data showed that the dye uptake process followed the pseudo second-order rate expression. Conclusion: The biosorption process provided vital information on the process parameters required to obtain the optimum level of dye removal. The isotherm study indicated the homogeneous distribution of active sites on the biomass surface, and the kinetic study suggested that chemisorption is the rate-limiting step that controlled the biosorption process. According to the obtained results, P. tigrinus biomass can be used effectively to decolorize textile dyes and tackle the pollution problems in the environment.

Heavy Metals Biosorption from Aqueous Solution by Endophytic Drechslera hawaiiensis of Morus alba L. Derived from Heavy Metals Habitats

The ability of dead cells of endophytic Drechslera hawaiiensis of Morus alba L. grown in heavy metals habitats for bioremoval of cadmium (Cd²⁺), copper (Cu²⁺), and lead (Pb²⁺) in aqueous solution was evaluated under different conditions. Whereas the highest extent of Cd²⁺ and Cu²⁺ removal and uptake occurred at pH 8 as well as Pb²⁺ occurred at neutral pH (6–7) after equilibrium time 10 min. Initial concentration 30 mg/L of Cd²⁺ for 10 min contact time and 50 to 90 mg/L of Pb²⁺ and Cu²⁺ supported the highest biosorption after optimal contact time of 30 min achieved with biomass dose equal to 5 mg of dried died biomass of D. hawaiiensis. The maximum removal of Cd²⁺, Cu²⁺, and Pb²⁺ equal to 100%, 100%, and 99.6% with uptake capacity estimated to be 0.28, 2.33, and 9.63 mg/g from real industrial wastewater, respectively were achieved within 3 hr contact time at pH 7.0, 7.0, and 6.0, respectively by using the dead biomass of D. hawaiiensis compared to 94.7%, 98%, and 99.26% removal with uptake equal to 0.264, 2.3, and 9.58 mg/g of Cd²⁺, Cu²⁺, and Pb²⁺, respectively with the living cells of the strain under the same conditions. The biosorbent was analyzed by Fourier Transformer Infrared Spectroscopy (FT-IR) analysis to identify the various functional groups contributing in the sorption process. From FT-IR spectra analysis, hydroxyl and amides were the major functional groups contributed in biosorption process. It was concluded that endophytic D. hawaiiensis biomass can be used potentially as biosorbent for removing Cd²⁺, Cu²⁺, and Pb²⁺ in aqueous solutions.

Biosorption of anionic textile dyes from aqueous solution by yeast slurry from brewery

ABSTRACT This study investigated the biosorption of the anionic textile dyes: Reactive Red 239 (RR239), Reactive Black B (RBB) and Direct Blue 85 (DB85) according to pH, biomass dosage, contact time and dye concentration onto waste beer yeast slurry. The kinetics and isotherm of the removal of dyes were also studied. The equilibrium of biosorption reaction was reached after 30 min for the reactive dyes and after 60 min for the direct dye. Optimum decolorization was observed at pH 2 and 0.63 g/L of biomass dosage. The kinetic data of the three dyes were better described by the pseudo second-order model. The adsorption process followed the Langmuir isotherm model and the biosorption capacity being estimated to be 152.9, 162.7 and 139.2 mg/g for RR239, RBB and DB85, respectively. Our findings indicated that the waste beer yeast slurry was an attractive low-cost biosorbent for the removal of anionic textile dyes from aqueous solution.

Assessment of cadmium tolerance and biosorptive potential of Bacillus Cereus GCFSD01 isolated from cadmium contaminated soil

Abstract Continuous occurrence of heavy metals is a major cause of environmental pollution due to its toxic effects. At minimum concentrations, these metals are highly reactive and can gather in the food chains and food web, causing major dangers to public health concerns. Soil samples were collected from Paharang drain, Faisalabad. Cadmium tolerant bacteria were isolated and evaluated for their MIC against Cd. The isolated bacterial strain GCFSD01 showed MIC value upto 30 mM/L. The bacterial strain with the highest resistance against Cd was selected for further study. Molecular characterization of bacterial isolate GCFSD01 was performed by 16S rRNA which confirmed it as Bacillus cereus. Optimum growth conditions of bacterial strain were also evaluated. Strain GCFSD01 showed optimum growth at pH 7 and 37 °C temperature. Our result revealed that B. cereus strain GCFSD01 reduced 61.3% Cd after 48 hrs. Multiple metal tolerance and Cd reduction by B. cereus indicate its potential for further use for decontamination of polluted soil.

Resumo A ocorrência contínua de metais pesados é uma das principais causas de poluição ambiental devido aos seus efeitos tóxicos. A contaminação por metais pesados representa um grande risco para todas as formas de vida encontradas no meio ambiente. Em concentrações mínimas, esses metais são altamente reativos e podem se acumular nas cadeias alimentares e na cadeia alimentar, causando grandes perigos às preocupações com a saúde pública. Amostras de solo foram coletadas no esgoto de Paharang, Faisalabad. Bactérias tolerantes ao cádmio foram isoladas da amostra coletada pelo método da placa de ágar. As colônias separadas individuais selecionadas foram avaliadas quanto às suas concentrações inibitórias mínimas contra Cd. A cepa bacteriana isolada GCFSD01 apresentou valores de CIM de 30 mM/L. A colônia bacteriana que apresentou maior resistência contra o Cd foi selecionada para identificação. Após seleção da maior colônia bacteriana resistente ao Cd, coloração de Gram e diferentes testes bioquímicos foram realizados para a caracterização da bactéria isolada. A caracterização molecular do isolado bacteriano GCFSD01 foi realizada por PCR 16S rRNA confirmando a presença de Bacillus cereus. Após a identificação molecular, as condições ótimas de crescimento da cepa bacteriana também foram verificadas. A cepa GCFSD01 apresentou crescimento ótimo em pH 7 e temperatura de 37 °C. Nosso resultado revelou que a cepa de B. cereus GCFSD01 reduziu 61,3% de Cd após 48 horas. A tolerância a múltiplos metais e a redução de Cd por B. cereus indicam seu potencial para uso posterior na descontaminação do solo poluído.

Evaluation and enhancement of heavy metals bioremediation in aqueous solutions by Nocardiopsis sp. MORSY1948, and Nocardia sp. MORSY2014

ABSTRACT An analysis of wastewater samples collected from different industrial regions of Egypt demonstrated dangerously high levels of nickel (0.27-31.50 mg L-1), chromium (1.50-7.41 mg L-1) and zinc (1.91-9.74 mg L-1) in the effluents. Alarmingly, these heavy metals are among the most toxic knownones to humans and wildlife. Sixty-nine Actinomycete isolates derived from contaminated sites were evaluated under single, binary, and ternary systems for their biosorption capacity for Ni2+, Cr6+ and Zn2+ from aqueous solutions. The results of the study identified isolates MORSY1948 and MORSY2014 as the most active biosorbents. Phenotypic and chemotypic characterization along with molecular phylogenetic evidence confirmed that the two strains are members of the Nocardiopsis and Nocardia genera, respectively. The results also proved that for both the strains, heavy metal reduction was more efficient with dead rather than live biomass. The affinity of the dead biomass of MORSY1948 strain for Ni2+, Cr6+ and Zn2+ under the optimized pH conditions of 7, 8 and 7, respectively at 40 °C temperature with 0.3% biosorbent dosage was found to be as follows: Ni2+ (87.90%) > Zn2+ (84.15%) > Cr6+ (63.75%). However, the dead biomass of MORSY2014 strain under conditions of pH 8 and 50 °C temperature with 0.3% biosorbent dose exhibited the highest affinity which was as follows: Cr6+ (95.22%) > Ni2+ (93.53%) > Zn2+ (90.37%). All heavy metals under study were found to be removed from aqueous solutions in entirety when the sorbent dosage was increased to 0.4%.

Screening of Trichoderma isolates for their potential of biosorption of nickel and cadmium

Abstract Fourteen Trichoderma isolates were evaluated for their tolerance to two heavy metals, nickel and cadmium. Three isolates, MT-4, UBT-18, and IBT-I, showed high levels of nickel tolerance, whereas MT-4, UBT-18, and IBT-II showed better tolerance of cadmium than the other isolates. Under nickel stress, biomass production increased up to a Ni concentration of 60 ppm in all strains but then decreased as the concentrations of nickel were further increased. Among the nickel-tolerant isolates, UBT-18 produced significantly higher biomass upon exposure to nickel (up to 150 ppm); however, the minimum concentration of nickel required to inhibit 50% of growth (MIC50) was highest in IBT-I. Among the cadmium-tolerant isolates, IBT-II showed both maximum biomass production and a maximum MIC50 value in cadmium stress. As the biomass of the Trichoderma isolates increased, a higher percentage of nickel removal was observed up to a concentration of 40 ppm, followed by an increase in residual nickel and a decrease in biomass production at higher nickel concentrations in the medium. The increase in cadmium concentrations resulted in a decrease in biomass production and positively correlated with an increase in residual cadmium in the culture broth. Nickel and cadmium stress also influenced the sensitivity of the Trichoderma isolates to soil fungistasis. Isolates IBT-I and UBT-18 were most tolerant to fungistasis under nickel and cadmium stress, respectively.

Effect of Cadmium Levels on the Growth Curve of Candida albicans.

Environmental pollution by toxic heavy metals is one of the most pressing problems. Metals are released in the environment in industrial effluent. Cadmium is one of the heavy metal toxic to microorganisms; however, there are yeast strains resistant to this metal. One of yeast species Candida albicans is a diploid fungus (a form of yeast) that is a causal agent of opportunistic oral and genital infections in humans. In the present study, effect of Cadmium on the growth curve of Candida albicans was demonstrated. Candida albicans was grown both in the presence and absence of Cadmium in YEPD media. Growth curves of the Candida albicans were plotted to study the growth pattern of the yeast isolate. It was found that Candida albicans grow well at 50 μg/ml concentration of cadmium. The organism was found to be resistant to the used heavy metal. Growing metal resistant cells is very important as it can ensure better removal through the process of biosorption. Such approaches may help in the removal of toxic metals from the environmental thus reducing environmental pollution.

Adsorción de Cr(VI) por Cocos nucífera L. en residuales de Fibrocemento en Santiago de Cuba / Cr(VI) adsorption by Cocos nucífera L. in wastewater of fibrocement from Santiago de Cuba

La adsorción y/o formación de complejos de metales pesados basados en la actividad química de la biomasa, es el proceso conocido como biosorción y es la base de una nueva tecnología para su remoción en efluentes industriales y su posterior recuperación. En esta tecnología se pueden utilizar diferentes tipos de biomasas tales como: algas, microorganismos y sub-productos agrícolas. Este trabajo estudió la adsorción de Cr(VI) utilizando la cáscara del fruto de la planta Cocos nucífera L. como biomasa orgánica. Los valores óptimos de adsorción de Cr(VI) son: pH de 3 unidades; tamaño de partícula menor que 0,074 mm; dosis de adsorbente de 5 g.dm-3 y tiempo contacto de 1 hora. A valores bajos de concentración del metal (1,0; 1,5 y 1,84 mg.dm-3) se obtuvo porcentaje de remoción superiores a 90, sin embargo a altos valores de concentración (2,5 y 3 mg.dm-3), se obtienen valores inferiores al 90 %. El proceso pudo ser estudiado a través de los modelos de Langmuir y de Freundlich, ya que el coeficiente de correlación para ambos modelos fue de 0,994 y 0,991 respectivamente. Se logra remover los iones Cr(VI) a valores de pH de 3 y 7 unidades en una matriz real, alcanzando valores de remoción de 96,85 % y 93,71 % respectivamente.

Adsorption and/or formation of complexes of heavy metals based on the chemical activity of the biomass, it is the process known as biosorption and it is the base of a new technology for its removal in industrials effluent and its posterior recuperation. In this technology, different kinds of biomasses can be utilized such as: algae, microorganisms and agricultural subproducts. In this work, the adsorption of Cr(VI) was studied utilizing the nutshell of the fruit of the plant Cocos nucífera L as organic biomass. The optimal values of adsorption of Cr(VI) are: pH of 3 units, size of particle smaller than 0.074 mm, doses of adsorbent of 5 g.dm-3 and contact time of 1 hour. At low values of concentration of the metal (1.0, 1,5 and 1.84 mg.dm-3) percentage of removal superior to 90% were obtained, however, at high values of concentration (2.5 and 3 mg.dm-3) values inferior to 90 % are obtained. The process can be studied by the models of both, Langmuir and of Freundlich, because the , coefficient of correlation for these two models was 0.994 and 0.991 respectively. The ions Cr(VI) can be removed at values of 3 and 7 units in a real matrix, reaching removal values of 96.85% and 93.71% respectively.

Efficacy evaluation and kinetic study of biosorption of nickel and zinc by bacteria isolated from stressed conditions in a bubble column

Objective: To investigate the biosorption potential of isolated bacteria as an alternative biosorbent material for the removal of zinc and nickel from aqueous solution in a bubble column bioreactor. Methords: In this study from four points of waste water treatment plant, some Gram-positive and Gram-negative bacteria under heavy metal stress conditions were isolated by microbiological methods. Biosorption experiments were conducted in a bubble column containing waste water in high concentrations of nickel and zinc inoculated by isolated bacteria. A kinetic study was done to investigate the fitting of either pseudo first-order or second order equations. Results: The 96% removal of zinc and 54% removal of nickel were achieved by biosorption column experiment by the isolated bacteria. A comparison between a non-aerated and aerated column shows a higher removal percentage with the same contact time. The study of contact time in the experiments also confirmed that with more contact time, while the removal efficiency increases the capacity of microorganisms to absorb the metal ions decreases. Results of kinetic study showed pseudo-second-order equation with a coefficient of determination of 0.9648 and 0.9992 for zinc and nickel, and the pseudo-first-order equation with 0.2410 and 0.4794, respectively. Conclusions: It was be concluded that biosorbtion method is a suitable alternative method to remove metal ions for further study in large scale.

Efficacy evaluation and kinetic study of biosorption of nickel and zinc by bacteria isolated from stressed conditions in a bubble column

OBJECTIVE@#To investigate the biosorption potential of isolated bacteria as an alternative biosorbent material for the removal of zinc and nickel from aqueous solution in a bubble column bioreactor.@*METHORDS@#In this study from four points of waste water treatment plant, some Gram-positive and Gram-negative bacteria under heavy metal stress conditions were isolated by microbiological methods. Biosorption experiments were conducted in a bubble column containing waste water in high concentrations of nickel and zinc inoculated by isolated bacteria. A kinetic study was done to investigate the fitting of either pseudo first-order or second order equations.@*RESULTS@#The 96% removal of zinc and 54% removal of nickel were achieved by biosorption column experiment by the isolated bacteria. A comparison between a non-aerated and aerated column shows a higher removal percentage with the same contact time. The study of contact time in the experiments also confirmed that with more contact time, while the removal efficiency increases the capacity of microorganisms to absorb the metal ions decreases. Results of kinetic study showed pseudo-second-order equation with a coefficient of determination of 0.9648 and 0.9992 for zinc and nickel, and the pseudo-first-order equation with 0.2410 and 0.4794, respectively.@*CONCLUSIONS@#It was be concluded that biosorbtion method is a suitable alternative method to remove metal ions for further study in large scale.